Valved Spacer manufacturers and PCD Company – Valved Holding Chambers (VHCs) are medical devices approved by the Food and Drug Administration and available by prescription. Spacer/VHC helps to improve inhaled medication delivery to the lower airways. This is achieved primarily by enhancing hand-mouth coordination with the use of metered-dose inhalers (MDI) which reduces oral deposition of the particles and increases the fraction of droplets. Going for such products requires the best company and in this aspect, Luckys Pharma is the best Valved Spacer manufacturers and PCD Company.
On the mouthpiece of an MDI, the spacer is a generic term for any open tube placed to extend its distance from the mouth. Often, a VHC has a whistle to provide feedback on correct inspiratory flow.VHCs are preferable to spacers, Due to their one-way valve and whistle.
Table of Contents
Luckys Pharma isoneof the top-notch Valved Spacer manufacturers and PCD Company that manufactures and delivers the massive range of products that with utter hygeine and safety aspect. We manufacture the best range of Valved Spacer segment.
The speed of inspiration is important in Valved Spacer. If inhaled medication such as corticosteroids is inhaled too slowly, the medicine can remain in the mouth leading to an increased risk of candidiasis. If the medication is inhaled too quickly, the medicine can be deposited in the back of the throat leading to an increased risk for dysphonia (hoarseness).
Spacers/VHCs are made of either polycarbonate plastics or metal. Typically they are shaped like a tube with openings at both ends; one opening is the mouthpiece that is placed into the mouth and the other opening is where the MDI is inserted.
If a facemask is being used with a child or adult who cannot actively participate in medication-taking, hold the VHC with the facemask in place for 6 full breaths. This equals one puff. Repeat as prescribed.
Manufacturers’ recommendations for care and cleaning will differ by the frequency of use, the type of device, and whether the spacer/VHC is made of plastic or non-static plastic, or metal. The directions below are general guides. to determine the correct care for a specific device, please refer to the manufacturers’ instructions.
Disassemble all removable parts.
Wash by hand and for 15 minutes, soak in diluted household detergent.
Do NOT rinse. Do not use bottle washers.
Allow drying thoroughly in a vertical position.
Reassemble and use as directed.
Disassemble all removable parts.
Wash by hand and soak in diluted household detergent for 15 minutes. Agitate gently.
Allow drying thoroughly in a vertical position.
Reassemble and use as directed.
Luckys Pharma is a leading PCD franchise company, we manufacture Valved Spacers with the best quality of material which ensures complete safety. Here we have listed below are some of the amazing aspects:
Company Name: Luckys Pharma
Address: Plot No. 82, 1st Floor, Jaora Compound, Near Police Lines, Indore, M.P. India
Phone: 08889909734, 08889909733
Email: info@luckyspharma.com